Every Feature of the CC1 PRO, Explained
Beyond the headline specs — this page covers what the PUDU CC1 PRO does that no other commercial cleaner can: four cleaning modes in one platform, AI-directed spot scrubbing, the world's first rear-camera cleaning verification, and autonomous 24/7 operation without supervision.
4 Cleaning Modes, One Platform
No other commercial robot consolidates sweep, vacuum, mop, and scrub into a single unit that AI-selects the right mode per floor zone. Click each mode to see exactly what it does.
Sweep Mode
Rotating side brushes sweep debris — including large particles, wrappers, and tracked-in grit — into the main path. Ideal as a first-pass mode before vacuuming or scrubbing. Operates silently enough for open-hours use in retail and hospitality.
AI Spot Scrubbing — Targets Dirt, Skips Clean Floors
Traditional scrubbers clean at a fixed intensity everywhere — burning time, water, and detergent on already-clean surfaces. CC1 PRO's AI Spot Scrubbing detects problem zones in real-time and concentrates deep-scrub power exactly where it's needed.
Real-Time Stain Detection
Onboard AI vision identifies stubborn stains, scuff marks, and dried spills while the robot navigates. No pre-mapping or manual flagging required.
Variable Intensity Per Zone
AI Cleaning Intensity Control scales brush pressure and water output from light maintenance to maximum scrub power — automatically. Light soil gets a light pass. Heavy grease gets the full treatment.
1,500–3,000 m²/h Focused Efficiency
By concentrating scrubbing on problem spots instead of uniform full-coverage mode, CC1 PRO processes high-traffic areas up to 2x faster without sacrificing cleanliness standards.
CC1 PRO uses AI to detect carpet automatically — switching to vacuum-only mode instantly to protect carpet pile while still delivering 17,000 Pa deep clean.
World's First Rear Camera Cleaning Verification
Every other robot assumes the floor is clean after it passes. CC1 PRO checks. A rear-facing AI camera monitors cleanliness behind the robot in real time — and re-cleans automatically if anything was missed.
Rear AI Camera
A dedicated rear-facing camera and AI model continuously evaluates the floor surface directly behind the robot's cleaning path. It checks for residual stains, missed streaks, and cleaning agent residue — the things human QC walkthroughs catch hours later.
Auto Re-Clean Trigger
If the verification camera detects a problem zone after the first pass, CC1 PRO autonomously re-routes to cover that area again — immediately and without supervisor instruction. The cleaning mission continues; the problem is resolved in real time.
Cleaning Heatmaps
Every session generates a floor-cleanliness heatmap showing which zones were clean, which triggered re-cleaning, and historical patterns. Facility managers can pinpoint chronic problem areas — grease traps, forklift turning zones, entrance vestibules — and adjust cleaning programs accordingly.
Zero-Guess Cleanliness Guarantee
No other commercial floor robot verifies its own work. The CC1 PRO rear camera system eliminates the need for post-shift manual inspection — shifting quality assurance from a human labor cost to an automated function that runs on every single mission.
Omni-Sense safety stops for both static obstacles and moving people — forklifts, carts, and pedestrians — simultaneously.
LiDAR + Visual Fusion — No Infrastructure Required
VSLAM+ combines LiDAR sweep data with camera-based visual landmark recognition to build and maintain an accurate real-time map — no QR codes, no floor stickers, no retrofit infrastructure.
Handles Complex Environments
Grocery aisles, narrow warehouse corridors, open retail floors, and irregular hospital layouts — VSLAM+ adapts to any space on first run.
Static + Dynamic Obstacle Avoidance
Omni-Sense Safety simultaneously detects fixed obstacles and moving ones (people, carts, forklifts) with independent response logic for each.
Breakpoint Resume
If the robot needs to divert for charging, restock, or an emergency stop, it resumes exactly where it left off — no re-mapping, no lost progress.
Multi-Floor Mapping
Stores independent maps for every floor. Operators assign routes per level and schedule them independently — perfect for multi-story hospitals, hotels, and office buildings.
24/7 Autonomous Operation — No Human Required
CC1 PRO handles its own servicing between every mission — charging, water management, and brush maintenance — without operator intervention.
Auto-Charging
Returns to docking station when battery is low or cleaning mission completes. Plugs in and charges without any human interaction.
Water Refill/Drain
Optional docking station handles water refill and waste drainage automatically. No buckets, no mess, no scheduled manual water changes.
Dynamic Rerouting
If an obstacle blocks the path mid-mission, CC1 PRO reroutes dynamically, completes the zone, and marks the obstacle for reporting.
Runtime Per Charge
Up to 5 hours of continuous runtime per charge — enough for large-facility full-coverage shifts in airports, hospitals, and distribution centers.
Runs During Off-Hours — No Shift Conflicts
Schedule CC1 PRO to clean during closing hours, overnight, or between customer-facing periods. The robot begins, completes, docks, and charges — staff arrive in the morning to a clean facility with a full mission report.
AI Component Self-Monitoring
CC1 PRO monitors its own hardware health continuously — tracking brush wear, suction performance, battery degradation, and sensor calibration — and alerts facility managers before a failure interrupts operations.
Brush Wear Tracking
Monitors rotational resistance and suction performance to predict brush replacement before it impacts cleaning quality — not after.
Suction Blockage Detection
Detects airflow restriction caused by accumulated debris in the suction path and alerts operators immediately to prevent motor strain.
Battery Health Reporting
Tracks charge cycle count and capacity degradation, surfacing battery replacement recommendations before runtime drops noticeably.
Remote Diagnostic Access
All component health data is accessible via the PUDU Link app — facility managers see the robot's maintenance status from anywhere, without physical inspection.
Predictive alerts — not reactive failures. CC1 PRO flags problems before they stop operations.
Connected Facility Intelligence
CC1 PRO connects to PUDU's intelligent platform — a 10.1-inch onboard display, full remote monitoring, and actionable post-clean analytics.
10.1" LCD Display
A large, high-visibility touchscreen shows current task, cleaning mode, zone map, and status at a glance. Operators can adjust tasks, pause missions, and review recent results directly on the robot — no app required for on-site management.
Remote Monitoring
Full fleet visibility from PUDU Link — real-time location, current task, battery level, and water status for every robot across every floor. Managers monitor operations from their phone without being on-site.
Cleaning Heatmaps
Post-session heatmaps overlay cleaning coverage and intensity onto your facility map. Identify high-traffic problem zones, verify SLA compliance, and optimize scheduling based on actual data — not guesswork.
Floor Cleanliness Tracking
AI assigns a cleanliness score to each zone after every session. Track trends over time — see if a zone is consistently being re-cleaned, whether foot traffic patterns changed, or whether a cleaning schedule adjustment is needed.
Ready to See CC1 PRO in Action?
No spec sheet replaces watching CC1 PRO switch cleaning modes on the fly, re-clean a flagged zone automatically, and dock itself — all in your own facility.